Stat-X systems provide highly effective, environmentally friendly fire suppression for fires in enclosed facilities and local spaces. Unlike FM-200, Halon or C02, the Stat-X systems do not require the pressure vessels, pipe work, and extensive installation manpower. The aerosol generators are virtually maintenance free. The Stat-X generators effectiveness is a function of its patented design, aerosol composition, and the ultra-fine aerosol particles produced, which is both non-toxic, and non-corrosive.
The agent is potassium based, and is 5 times as effective as Halon. Primary extinguishment mechanism is chemical interference with free radicals of flame, which interrupts the propagation of fire. The SP-1 control panel is used for monitoring and controlling the Stat-X fire extinguishing generators. This unit can be used on vehicles, trains, boats, and cars. It fits into dashboards or instrument panels. The SP-1 is only 2.75" x 2.75" and can be used with heat sensor cable, smoke detectors, heat detectors, pull stations and beacon lights.

• System Features
  >Suitable for Class A (surface), B, C fires
  >Environmentally friendly, ( ODP ) =0
  >Extinguishing concentration 62g/m3 for class B fires
  >Generator sizes to fit any hazard
  >Generator Classification: Class Code 1.4S Pack PG1 UN # 0432
  >ULC Approved (Stat-X only)
  >EPA Approved Halon Replacement
  >Control Panel operation 12 or 24V CE
  >Manual discharge from control unit
  >Heat sensor cable for detection
  >Easy installation

A. Connection of the Stat-X to the SP-1 Control Panel
B. Connection of the Thermal Heat Cable to the SP-1 Control Panel
C. Connection of the Power Source to the Control Panel (12 or 24 V)
D. Connection of the Ignition / Main Power to the SP-1 Control Panel
E. Lead from junction box to Stat-X
F. Thermal heat sensing cable & 47k resistor